Buy Part Number LD09 0400 for NSN 5905013591800 of General Dynamics Global Imaging

Part Number: LD09 0400

Alternate P/N: LD090400

Manufacturer: General Dynamics Global Imaging

NSN: 5905-01-359-1800

NIIN: 013591800

Item Name : Resistor Variable Wire Wound Pre

CAGE Code: 10112

FSC: 5905 Resistors

FSG: 59 Electrical and Electronic Equipment Components

Country: USA

NCB Code: 01

You have reached the quote request page for part number LD09 0400 of General Dynamics Global Imaging, we have in stock that is listed alongside the description Resistor Variable Wire Wound Pre. If you would like to learn more about this NSN part and your purchasing options, please fill out and submit the Request the Quote (RFQ) page presented on this page. By offering us important details like your target price and expected fulfillment time frame, our team can best offer you a tailored solution for your consideration. As we have staff available at all times, responses to any submission will be offered within 15 minutes of our review.

Note : We Will Not Share Your Information With Any Third Parties.

Product Details

“*” Required Fields Are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

Upload File

To make exploring our expansive inventory simple, we have chosen to list all offerings alongside as much information as we can for an ease of identification. For example, part number LD09 0400 is specifically produced under CAGE Code 10112, denoting the specific General Dynamics Global Imaging facility it traces back to. Furthermore, with the NSN 5905-01-359-1800, this item also belongs to FSC 5905 Resistors, further ensuring that you only purchase your exact needs. If you have any questions or concerns regarding our offerings or service, be sure to call or email us at your convenience. Otherwise, we look forward to serving you as your strategic sourcing partner for part number LD09 0400 and more.

NSN Information for Part Number LD09 0400 with NSN 5905-01-359-1800, 5905013591800

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5905-01-359-1800 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,PRE	5905	013591800	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			G
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
LD09/0400	5	2	5

Characteristics Data of NSN 5905-01-359-1800, 5905013591800

MRC	Criteria	Characteristic
AAPN	SECTION QUANTITY	1
AAQL	BODY STYLE	CYLINDRICAL SERVO MOUNTED
ABWV	SHAFT DIAMETER	0.1246 INCHES MINIMUM AND 0.1248 INCHES MAXIMUM
ADAQ	BODY LENGTH	1.440 INCHES MAXIMUM
AEFD	ACTUATOR TYPE	SINGLE SHAFT
AEFL	MAXIMUM RUNNING TORQUE	1.00 INCH-OUNCES
AFJN	FRAGILITY FACTOR	MODERATELY RUGGED
AJYQ	SCREW THREAD QUANTITY PER INCH	32.0
CRSS	RESISTANCE TOLERANCE PER SECTION IN PERCENT	-10.0 TO 10.0 SINGLE SECTION
CRSX	ACTUATOR TRAVEL CONTROL FEATURE	CLUTCH
PMLC	PRECIOUS MATERIAL AND LOCATION	TERMINALS GOLD
TTQY	TERMINAL TYPE AND QUANTITY	4 TURRET
AEFM	MAXIMUM STOP TORQUE	96.00 INCH-OUNCES
CRGD	POWER DISSIPATION RATING PER SECTION IN WATTS	2.75 FREE AIR SINGLE SECTION
AARG	RELIABILITY INDICATOR	NOT ESTABLISHED
AAVL	PILOT DIAMETER	0.7495 INCHES MINIMUM AND 0.7505 INCHES MAXIMUM
ABPM	BODY DIAMETER	0.865 INCHES MINIMUM AND 0.880 INCHES MAXIMUM
AECZ	MOUNTING LIP DIAMETER	0.8650 INCHES MINIMUM AND 0.8800 INCHES MAXIMUM
AEFH	EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION	3600.0 NOMINAL
AEFK	MAXIMUM STARTING TORQUE	1.00 INCH-OUNCES
AJYN	SCREW THREAD DIAMETER	0.250 INCHES NOMINAL
CQCK	ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	3600.0 NOMINAL
CQFL	FUNCTION CONFORMITY TOLERANCE PER SECTION	-0.20 TO 0.20 SINGLE SECTION
CQGN	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	150.0 SINGLE SECTION
CRJS	FIXED TAP QUANTITY PER SECTION	1 SINGLE SECTION
AAVM	PILOT LENGTH	0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM
ABPA	UNDERCUT DIAMETER	0.880 INCHES NOMINAL
ABPC	UNDERCUT WIDTH	0.0570 INCHES MINIMUM
ABXF	SHAFT LENGTH	0.843 INCHES MINIMUM AND 0.907 INCHES MAXIMUM
AEDA	MOUNTING LIP DEPTH	0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM
AEDX	SHAFT STYLE	ROUND
AEDZ	SHAFT BEARING TYPE	SLEEVE
AJYP	SCREW THREAD SERIES DESIGNATOR	UNEF
APXH	TERMINAL LOCATION	RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE
AXGY	MOUNTING METHOD	CLAMP RING AND STANDARD BUSHING
CQCC	ELECTRICAL RESISTANCE PER SECTION	10.0 OHMS SINGLE SECTION
CQCH	TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION	1800.0 SINGLE SECTION
CRFJ	TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS	-20.0 TO 20.0 SINGLE SECTION
CRGM	FUNCTION CONFORMITY PER SECTION	SINGLE SECTION INDEPENDENT LINEARITY
CSBW	TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS	5000.0 SINGLE SECTION
CSBX	FUNCTION CHARACTERISTIC PER SECTION	SINGLE SECTION LINEAR
CSDH	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	40.0 SINGLE SECTION
PRMT	PRECIOUS MATERIAL	GOLD